Something I've wanted to do since we've moved into this house I've been frustrated with the lower cabinets in our kitchen. There is a lot of space, but it is so hard to get to anything. I knew that I wanted to install cabinet pullout drawers for two of the lower cabinets so that we can better utilize this space. Let's get started!

I love any tools that make my life easier, and using a pocket hole jig is one of those tools. I've had my Kreg pocket hole jig for about seven years now, and it has been well loved and well used. However, it's missing a bit and I am doing much bigger projects now so it was time for a new toolI. I'm so excited about it, so I'm going to assemble it and show you how it works. Let's get started!

When we moved into our house in 2020, I knew I wanted to redo our primary bedroom closet. It had wire shelving that I hate and wasn't utilizing the space efficiently. I started off with an IKEA design. However, our closest IKEA is two hours away. It didn't have everything we needed and it was going be $250 to ship and some of it wouldn't even be able to ship. I decided to use things we had and buy some other things to fit the space and make it on my own.

We have a set that was my grandmother's from childhood, so it is over a hundred years old. It is the small vanity, a tall dresser, and then what used to be a set of twin beds that my parents had combined into a queen bed. The head board is two headboards combined into one. There is a distinct seam where the two bed frames were combined. The issue we have is that on the footboard of the bed frame at very bottom there is a rippled detail piece. This piece is starting to come off, the glue has worn away and some of the dowels are breaking. So I decided to take a look at it and see if there was something I could do to fix it. It's a very sentimental piece that I  know my parents don't want to have to get rid of. So I decided to take a look at it and see if there was something I could do to fix it.

We really didn't like lights that came with our house. I had never done electrical work before, but I decided that I wanted to change them out and there is a first time for everything. So, let me show you what I did!

We recently went over how best to remove baseboards. So, today, we're going to talk about how we can install baseboards the most efficiently. Let's get started!

Let's talk about the best way to remove baseboards without damaging your walls. I've done this a bunch of times now and have found a pretty foolproof way to do it. Let me show you how!